Slightly visible mending

A quick fix for a cardigan with a hole.

Slightly visable mending

Visible mending is very popular right now, hand stitching over patches of contrast fabric. I absolutely love the effect and I really love the principle of mending what we have rather than immediately buying new all the time.

For our daughter's black cardigan that she wears for work however, visible mending wasn't suitable, it's plain black needed all the way. Invisible mending seemed too much of a stretch so we did a quick repair that is half way between the two. I'm giving it the catchy title of "slightly visible mending", do you think it will catch on?!

This repair took about 5 minutes, it actually took longer to get the sewing machine out and then put it away after, than it did to do the repair.

The hole was near the elbow, originally I was thinking elbow patches, no need to reinvent the wheel here.

hole in sleeve.jpg

But the hole was in fact just below the elbow so unless an elbow patch was enormous it wasn't going to work. Also the cardigan is a fine knit and I couldn't think how to make elbow patches that wouldn't be too bulky and weigh the elbows down and pull them out of shape.

All I needed was a small rectangle of thin jersey knit fabric (this is actually a pair of one of the boys boxer shorts that had worn completely threadbare at the top so the elastic was in danger of falling out, just don't tell anyone I used underpants for this repair!) and some black thread.

piece of knit fabric.jpg

Black things are hard to take photos of - just saying!

I slid the sleeve, inside out, onto the free arm of the sewing machine.

on free arm.jpg

Then I laid the rectangle of knit fabric on top and stitched all over it. 

zig zag.jpg

Because the sleeve fitted snugly on the free arm there was no turning it round so I stitched forward, then backwards but at a very slight angle, then forwards again and so on. It made a big zig zag of stitches.

I removed the sleeve from the free arm, trimmed any excess fabric, then slid it back on right side out.

trim excess.jpg

I then repeated the process on the right side, that way I could make sure I was covering the largest hole really well.

The finished repair is pretty hard to see, doesn't feel overly rough on the inside and is not heavy or too lumpy.

finished mend.jpg

Success! 

Maybe not an idea for your best togs, but to make a work cardie last a little bit longer - perfect. 

slightly visible mending 2.jpg

Julie